Fourier MultiLogPRO User Manual page 21

Notes
Use the Arrow buttons to browse the notes.
You can use the MultiLab software to edit the notes or to write
new notes
Info
•
•
•
•
•
Note: When turning off the MultiLogPRO, the date and time is
reset. You restore the current date and time whenever the logger
communicates with MultiLab.
Timing
You can select between the following timing events:
•
•
•
•
Help
Configuration
Input Mode – Select Input Mode: Auto ID or 8 inputs
Clear memory – Delete the stored data files
DO2 – Press the Forward arrow button to enter the DO
Contrast – Use the arrow buttons to tune the screen contrast
Comm. – Press the Forward arrow button to connect to a
computer or the Backward arrow button to connect to TI
calculator
12 Chapter 1 MultiLogPRO
Display experiment notes and instructions
Display system information:
Number of experiments stored in MultiLogPRO's internal
memory
Memory usage
MultiLogPRO version
Battery level (unplug any sensor and external power supply)
Current date and time
Enter to the timing module
Stopwatch
Time and speed in one photogate
Time and speed between two photogates
Time, speed and acceleration between two photogates
On-line help and specifications
Configure the MultiLogPRO:
menu
2