Time And Speed - Fourier MultiLogPRO User Manual

5. Press Escape
timing menu
6. Press Escape

2. Time and Speed

In this mode MultiLogPRO measures time and speed either in one gate or between
gates.
_ _ _ _ _ T I M I N G _ _ _ _ _
→ M o d e : T i m e S p e e d
M e a s u r e : I n 1
C a r d w i d t h : 3 0 m m
G a t e s d i s t a n c e : _ _ _
S t a r t ( > )
Press Enter to select this mode. The arrow moves to the Measure row.
Use the Forward
measure time and speed in one gate or In1 → In2 if you want to measure time and
speed between two gates.
Time and speed at one gate
MultiLogPRO measures the time
between blocking and unblocking the
photogate at input 1
Time and speed at one gate
1. Press Enter , then use the arrow
buttons to select the card (the body
that blocks the gate) width in mm
between 0 to 59mm
2. Press Enter
Forward arrow button to enter to
a timing standby mode
to exit the stopwatch mode and return to the
a second time to return to the main menu
and Backward
twice, then use the
arrow buttons to select In1 if you want to
Time and speed between gates
MultiLogPRO measures the time
between blocking the photogate at input
1 and blocking the photogate at input 2
Time and speed between gates
1. Press Enter
Forward arrow button to select
the distance between the photogates
in cm between 0 to 99cm
2. Press Enter
Forward arrow button to enter to
a timing standby mode
Chapter 1 MultiLogPRO
twice, then use the
, then use the
15