Fourier MultiLogPRO User Manual page 112

9. The Download and Setup Wizard icons in the MultiLab main
toolbar will change to indicate that the PC is communicating with the
Nova5000, rather than with MultiLogPRO:
10. The Nova5000 is now ready for full control by the MultiLab for PC.
Enter the Setup Wizard to configure the sensor setup and then run
the Nova5000 to start recording data.
11. In the Setup Wizard, to setup the sensors manually you must go
to the Logger menu and unselect the Auto ID option. When Auto ID
is selected the sensors connected to the Nova5000 will be detected
automatically by the MultiLab PC software.
12. To return the Nova5000 to normal use of the MultiLab CE version,
open the Logger Options from the Control Panel and tap the Run
logger from Nova5000 button.
.
Chapter 2 MultiLab Software 103