Fourier MultiLogPRO User Manual page 18

4. Select Total Number of Samples
Use the Forward
of samples, and then press the Enter button
→
5. Choose Display
Use the Forward
display, and then press the Enter button
→
6. Start Recording
Press the Forward arrow button
Or press the Enter button if you want to go back to the first item (Rate).
You can stop recording any time by pressing the Escape button
and Backward
In–1: Microphone
In–2: Light
In–3:
In–4:
RATE = Every sec
SAMPLES = 200
DISPLAY = numeric
and Backward
In–1: Microphone
In–2: Light
In–3:
In–4:
SAMPLES = 200
DISPLAY = graphic
START = ( > ).
to start recording.
arrow buttons to select the number
.
arrow buttons to select the type of
.
Chapter 1 MultiLogPRO
.
9