Mac Os - Fourier MultiLogPRO User Manual

2. Connect MultiLogPRO to a USB port on your PC and turn
MultiLogPRO on. Windows will automatically detect the new device
and open the Found New Hardware Wizard.
3. Select Specify the location of the driver, then click Next.
4. Select Search for the best driver for your device, then check the
Removable Media checkbox, and then click Next.
5. Windows will automatically detect and copy the necessary files to
your system. Click Finish.
6. Windows will open the Found New Hardware Wizard for the
second time. Click Next to complete the installation.
7. Windows will automatically install the necessary components on
your system. Click Finish.
To install the Nova5000 driver:
You will need to install the Nova5000 driver in order for MultiLab for PC to
communicate with the Nova5000 data logger via a USB port.
You will need to install the Nova5000 drivers from the Nova5000 software CD or from
the MultiLab v1.4.11 Installation CD.
On Windows XP
1. Connect the Nova5000 to a USB port on your PC and turn the unit
on. Windows will automatically detect the new device and open the
Found New Hardware Wizard.
2. Select No, not this time to prevent Windows from searching for
software on the Internet, then click Next.
3. Select the Install from a list or specific location (Advanced)
option. Click Next.
4. Select the Include this location in the search option and browse
to the Nova Drivers folder in the MultiLab software folder, either on
your Nova5000 CD or MultiLab installation CD. Windows will
automatically detect and copy the necessary files to your system.
Click Finish.
5. Windows will automatically install the necessary components on
your system. Click Finish.

2. Mac OS

1. Insert the CD into your CD drive.
2. Open the CD drive folder and double-click the MultiLab Installer icon, then
follow the on-screen instructions to complete the installation process.
28 Chapter 2 MultiLab Software