Zooming - Fourier MultiLogPRO User Manual

To display the cursors in split graph mode:
To display the cursors on the upper graph, use the same method as for single graph
mode.
To display the cursors on the lower graph, you must first remove them from the upper
graph and then double click anywhere on the lower graph to display the first cursor.
Double click a second time to display the second cursor, and double click a third time
to remove the cursors.

3. Zooming

To zoom in to the center of the graph
1. Click Zoom in
2. To reverse the operation, click Zoom out
To zoom in to a specific data point
1. Select the point with the cursor (see above).
2. Click Zoom in
3. To reverse the operation click Zoom out
To zoom in to a range
1. Select the range with both cursors.
2. Click Zoom in
3. To reverse the operation click Zoom out
To zoom in to a specific area
Click Zoom to selection
select the area you want to magnify. Release the mouse button to zoom in to the
selected area.
Click Zoom to selection a second time to disable the zoom tool.
Autoscale
Click Autoscale
on an axis to auto scale that axis alone.
Manual scaling
1. Click Graph properties
properties dialog box.
2. Select the Scale tab, and choose the axis you want to scale in the
Select axis drop list.
on the graph toolbar.
on the graph toolbar.
on the graph toolbar.
on the graph toolbar and drag the cursor diagonally to
on the graph toolbar to view the full data display, or double click
on the graph toolbar.
on the graph toolbar.
on the graph toolbar.
on the graph toolbar to open the Graph
Chapter 2 MultiLab Software 45