Averaging - Fourier MultiLogPRO User Manual

2. If you use the cursor to select a data set, it will be highlighted in the
Based on data set list, but you have the option of selecting a
different data set.
3. Type a name in the Name box (optional - the default name includes
both the function and the data set names).
4. Click the Show equation on graph check box to display the line's
equation on the information bar.
5. Click the Show R
coefficient on the information bar.
6. Click OK.
Note: If you want the automatic curve fit equation to start at
before any type of curve fitting (see page 90).

3. Averaging

1. If you use the cursor to select a data set, it will be highlighted in the
Based on data set list, but you have the option of selecting a
different data set.
2. Select an averaging option (if you choose custom averaging,
choose the number of averaging points in the Points box).
3. Enter a name in the Name box (optional - the default name include
both the function and the data set names).
4. Select an Open option.
5. Click OK.
68 Chapter 2 MultiLab Software
2
on graph check box to display the correlation
Figure 20: Analysis wizard – averaging
=
t 0
, apply the crop tool