Averaging - Fourier TriLog User Manual

5. Click the Show R
coefficient on the information bar
6. Click OK
Note: If you want the automatic curve fit equation to start at
the crop tool before any type of curve fitting (see page 89).

3.Averaging

1. If you use the cursor to select a data set, it will be highlighted in the
Based on data set list, but you have the option of selecting a
different data set
2. Select an averaging option (if you choose custom averaging, choose
the number of averaging points in the Points box)
3. Enter a name in the Name box (optional - the default name include
both the function and the data set names)
4. Select an Open option
5. Click OK
2 on graph check box to display the correlation
Figure 24: Analysis wizard – averaging
Chapter 3 Working with MultiLab
=
, apply
t 0
77