11.3 Watchdog Timer Control Registers
The following two types of registers are used to control the watchdog timer.
• Timer clock select register 2 (TCL2)
• Watchdog timer mode register (WDTM)
(1) Timer clock select register 2 (TCL2)
This register sets the watchdog timer count clock.
TCL2 is set with an 8-bit memory manipulation instruction.
RESET input sets TCL2 to 00H.
Remark
Besides setting the watchdog timer count clock, TCL2 sets the watch timer count clock and buzzer output
frequency.
www.DataSheet4U.com
234
CHAPTER 11 WATCHDOG TIMER