Table of Contents
Advertisement
These pins can be used directly connected to PNP inputs (PLC) or used to turn on LEDs, buzzers or other
devices with 24V power supply. The maximum total power of the outputs is about 400mA. Using inductive
loads such as relays or other loads with an initial consumption peak greater than 400mA will send all
outputs to protection, displaying the message "output disable". To restore the outputs after a protection, turn
off and turn on the unit again.
Vers. 220920
16
Advertisement
Table of Contents
Need help?
Do you have a question about the 032000 and is the answer not in the manual?