Kolver 032000 Operational Manual page 49

- - - - O P T I O N S - M E N U - - - -
6 ) V e r s i o n s
7 ) S e r i a l

8 ) S e t
6) Versions:
in this screen you can see the versions of boards mounted inside the unit.
7) Serial number:
it is the indication number of the control unit. Default number: 0000000.
It could be the real serial number of the unit or another one you could choose (7 digits max).
This number will also be the name of the folder in the USB drive where you will save the report of your data
(see EDU EXPAND part).
- - - - O P T I O N S - M E N U - - - -
7 ) S e r i a l
8 ) S e t

9 ) C y c l e s :
8) Set time & date:
to set time and date on the control unit.
9) Cycles
- Total number of cycles: It shows the number of tightened and loosened screws. This number
can't be modified.
USB Options:
- - - - O P T I O N S - M E N U - - - -
1 ) R e a d

2 )
3 ) I n f o
Read USB:
1) press OK and read the USB drive and select the file SETxx.KOL you desire.
The EDU control unit recognizes only files as SETxx.KOL (see EDU EXPAND part).

O K
Vers. 211020
t i m e
t i m e
U S B
r i t e U S B
W
U S B
S e l e c t P r o g r a m
S E T 0 0 . K OL
c o n f i r m E S C
n . 0 0 0 0 0 0 0 0
& d a t e
n . 0 0 0 0 0 0 0 0
& d a t e
0 0 0 0 0 0 0

q u i t
Page 12