Table of Contents
Advertisement
1
P L U T O 1 0
3
S :
T :
5
1- Screwdriver model
2- Pre-set torque level (percentage)
3- Selected speed
4- Screw count: fastened screws/total screws (model EDU 2AE/HP
5- Reached torque level (model EDU 2AE/HP
6- Status bar ( waiting, screwing, errors, etc...)
FRONT PANEL LED:
Vers. 211020
6 0 0 r p m
- - -
r e a d y
only) in Nm, in.lbs or kgf.cm.
RO
To enter the menu press ESC for 2 seconds.
Select the line by pressing
will turn into
then confirm through OK (or ESC if you don't want to save the
value).
The selected value will be immediately operational, even if you
are still in the menu screen. Repeat these operations for all the
parameters you wish to set and then push ESC to return to the
main screen.
GREE LED: Screw OK.
YELLOW LED: Program End (only on EDU 2AE/HPro).
RED LED: error.
T % : 2 0 %
S :
0 / 0 3
6
only)
RO
then press OK (the symbol
or
). Press
or
to select the required value and
2
4
3
Advertisement
Table of Contents
