Table of Contents
Advertisement
7.
Using the control panel, confirm the measured values.
3.2 Using X5 Manual control panel
The X5 Wire Feeder 200 Manual and 300 Manual control panels (membrane panels) include the most essential features
and functions for MIG welding with the option to use the X5 FastMig also for MMA welding and gouging.
X5 Wire Feeder 300 Manual control panel (X5 FP 300R)
1.
Left control knob
>> In MIG mode: Wire feed speed
>> In MMA mode: Welding current adjustment
>> In Gouging mode: Current adjustment
2.
Right control knob
>> In MIG mode: Welding voltage adjustment
>> In MIG mode (push button): Switch between welding voltage and dynamics adjustment
>> In MMA mode: Dynamics adjustment
3.
Trigger logic selection
>> Switches between 2T and 4T trigger logic modes
4.
Welding process / operation mode selection
>> Switches between MIG, MMA and Gouging modes
5.
Home button
>> Switches to the default welding view/mode
6.
Weld data button
>> Shows the duration, current and voltage of the last weld
7.
Settings menu button
8.
Main display
>> Shows the wire feed speed, current and/or voltage (content shown depends on the welding process selected).
© Kemppi
74
X5 FastMig
Operating manual - EN
1920960 / 2144
Advertisement
Table of Contents
