Table of Contents
Advertisement
3. OPERATION
Before using the equipment, ensure that all the necessary installation actions have been completed according to your
equipment setup and instructions.
Welding is forbidden in places where there is an immediate fire or explosion hazard!
The interconnection cable heats up during welding. The wire feeder's cable cabinet door must be kept closed when
welding, and the cables must be handled with caution if the cabinet door is opened right after welding.
Check that there is enough space for cooling air circulation in the machine vicinity.
If the welding equipment is left unused for a longer period, disconnect the mains plug from the mains.
Always check before use that interconnection cable, shielding gas hose, earth return cable and clamp and mains
cable are in serviceable condition. Ensure that the connectors are correctly fastened. Loose connectors can impair
welding performance and damage connectors.
© Kemppi
71
X5 FastMig
Operating manual - EN
1920960 / 2144
Advertisement
Table of Contents
