Table of Contents
Advertisement
4.
CONTROL PANEL X 37
FastMig X 350MV power source features X 37 control panel with a clear and logical LCD menu
display. The menu allows the operator to refine, adapt and manage the arc process and system
function before, during and after welding.
The following information details control panel layout, button functions, operation and set-
up. The menu options and their descriptions are listed for each menu command.
4.1
Layout and button functions
1.
3.
1. ON/OFF button
• Short press returns the panel to default initial view (channel information).
• Long press (>5 sec) turns X 37 panel and wire feeder panel XF 37 (or XF 38) ON or OFF.
• Keeping this button pressed while turning the machine ON restores to factory settings. The
panel asks for a confirmation before restoring to defaults.
• If X 37 panel is OFF and a wire feeder panel XF 37 (or XF 38) is turned ON, the X 37 panel will
also be turned ON and linked automatically to this wire feeder panel.
This button connects power to the control panel. Use the main switch on the front of the
NOTE!
power source to switch the power source on or off.
2. Welding channel selection buttons
FastMig X 350MV offers 100 memory channels (10 for each user) for storing frequently used
welding jobs.
• To browse memory channels, press + and – buttons.
• To store a new welding job to an empty channel, press the soft key under the display
text NEW.
3. MENU button
This button takes you to the main menu list. Proceed following the instructions on screen.
X 37 main menu list
Edit Channel
User Identification
Weld Data
System Config Menu
© Kemppi Oy / R05
2.
7.
MENU
CHANNEL
USER
WF#
INFO
F1
F2
F3
6.
Make changes to existing welding channel
Selecti one user out of ten
Check out the values of the last weld
Show device configuration and information
8.
4.
X 37
5.
EN
11
Advertisement
Table of Contents
