Wisepenetration; Wisesteel - Kemppi X5 FastMig Operating Manual

>> To take WiseFusion into use, go to the control panel's
ture.
>> To adjust the welding power/wire feed speed, in the control panel's
>> To fine tune the heat output while welding, in the control panel's
For more information on Wise products, visit www.kemppi.com.

3.4.3 WisePenetration+

Available with automatic 1-MIG-enabled equipment only.
In standard MIG/MAG welding, changes in stick-out length cause welding current to fluctuate. WisePenetration+ main-
tains constant welding current by controlling the wire feed speed according to the stick-out length. This ensures stable
and effective penetration and prevents burn through. WisePenetration+ also adjusts the voltage adaptively, which keeps
the arc focused and optimally short. WisePenetration+ enables welding with Reduced Gap Technolology (RGT) and is
compatible with 1-MIG welding process.
>> To take WisePenetration+ into use, go to the control panel's
etration+ feature.
>> To adjust the welding current while welding, in the control panel's
>> To fine tune the heat output while welding, in the control panel's
For more information on Wise products, visit www.kemppi.com.

3.4.4 WiseSteel

Available with automatic 1-MIG-enabled equipment only.
The WiseSteel function is based on modifying the conventional MIG/MAG arcs to enable higher quality of welds.
WiseSteel improves the arc control, reduces spatter and helps create an optimally-formed weld pool.
>> To take WiseSteel into use, go to the control panel's
>> To adjust the welding power/wire feed speed while welding, in the control panel's
trol knob.
>> To fine tune the heat output while welding, in the control panel's
When using WiseSteel, different adjustment methods are applied at different power ranges (different arcs). The wire
feed speed / current indicator shows the arc range: Short arc — Globular arc — Spray arc.
Short arc range:
© Kemppi
Welding parameters view
Home view, turn the left control knob.
Home view, turn the right control knob.
Welding parameters view
Home view, turn the left control knob.
Home view, turn the right control knob.
Welding parameters view
Home view, turn the right control knob.
95
Operating manual - EN
and apply the WiseFusion fea-
and apply the WisePen-
and apply the WiseSteel feature.
Home view, turn the left con-
1920960 / 2144
X5 FastMig