Table of Contents
Advertisement
3.
USING THE CONTROL PANEL
MagTrac F 61 control panel allows you to view and adjust the welding parameter values.
You can use the values stored in the memory channels of the wire feeder, or you can set the
desired values on the welding carriage without using the memory channels.
If the memory channel function is active, you can see the channel number on the top row of
the carriage control panel display. The MagTrac F 61 communicates with the wire feeder via a
control cable integrated in the welding gun cable.
3.1
Control panel buttons
3.
2.
1.
Multi-function knob for browsing and selecting values
• Turn to scroll menus, press to select values
2.
Lower soft key for entering menus and executing commands
• Press to select the active menu item
3.
Upper soft key for exiting menus and approving selections
• Press to approve the selected value and to return to the previous menu level
4.
Direction button
• Press briefly to change the carriage travel direction
• Push for at least 3 seconds to reverse the direction of the display
(this helps the menu usage when MagTrac runs along vertical surface)
5.
Start and stop button
• Press this button to start or stop the welding operation
6.
Welding arc on/off button
• Press this button to turn the welding arc on and off. With the welding arc off, you can
test the carriage operation
When making selections in the MagTrac F 61 menu, you can use a quick shortcut: Turn and
NOTE!
press the multi-function knob 1 instead of pressing soft keys 2 and 3.
3.2
Starting up the control panel
When you start the welding system from the power source's main switch, the system turns on
and the MagTrac F 61 welding carriage is ready for use.
You can inactivate the system with a long press of the wire feeder's ON/OFF button. When the
system is inactive, the carriage cannot be used for welding.
© Kemppi Oy / R01
4.
BACK
WELD DATA
HEAT: 0.00 kJ/mm
RESET WELD DATA
RESET
PANEL OFF
MEMORY CH
300 mm/min
Press wire feeder
on/off button
5.0 m/min
SET
1.
ARC
ON
START
STOP
MagTrac F 61
CH OFF
6.
EN
5.
9
Advertisement
Table of Contents
