Table of Contents
Advertisement
4.
Secure the wire spool in place by turning to lock knob in closed position.
If needed, adjust the spool brake by turning the screw (with Allen key) in the center of the hub locking mechanism.
To install the filler wire:
1.
Release the filler wire end from the spool and cut off any deformed section so that the end is straight.
Ensure that the filler wire does not spill from the spool when it is released.
© Kemppi
49
X5 FastMig
Operating manual - EN
1920960 / 2144
Advertisement
Table of Contents
