Table of Contents
Advertisement
2.
File the tip of the filler wire smooth.
Sharp edges on the filler wire tip may damage the wire liner.
3.
Release the pressure arms to move the feed rolls apart.
4.
Guide the filler wire through the inlet tube (a) and middle wire guide tube (b) and into the outlet tube (c), which
feeds the filler wire to the welding gun.
5.
Push the filler wire by hand into the gun so that the wire reaches the wire liner (approx. 20 cm).
© Kemppi
50
X5 FastMig
Operating manual - EN
1920960 / 2144
Advertisement
Table of Contents
