Equipment Description - Kemppi X5 FastMig Operating Manual

1.1 Equipment description

X5 FastMig has several power source and wire feeder options to choose from. The control panel is always fixed to the
wire feeder.
X5 FastMig supports welding cable calibration without an additional measuring cable.
X5 power sources:
• X5 Power Source 400 (400 A)
• X5 Power Source 500 (500 A)
• X5 Power Source 400 (WP) (400 A, work pack version)
• X5 Power Source 500 (WP) (500 A, work pack version).
For the power source part descriptions, refer to "X5 Power Source 400 and 500" on page 8.
X5 wire feeders:
• X5 Wire Feeder 200 Manual
>> Comes with 2-knob membrane control panel (Manual)
>> Maximum wire spool diameter 200 mm
>> Not stackable with X5 power source (except with the additional steel pipe frame)
>> Optional model version with built-in rotameter for gas available
• X5 Wire Feeder 300 Manual
>> Comes with 2-knob membrane control panel (Manual)
>> Maximum wire spool diameter 300 mm
• X5 Wire Feeder 300 Auto
>> Comes with 2-knob 5.7" TFT/LCD control panel (Auto)
>> Includes automatic 1-MIG process that supports welding programs and Wise features
>> Maximum wire spool diameter 300 mm
• X5 Wire Feeder 300 Auto+
>> Comes with 2-knob 5.7" TFT/LCD control panel (Auto)
>> Includes automatic 1-MIG process that supports welding programs and Wise features
>> Maximum wire spool diameter 300 mm
>> Includes subfeeder support
>> Includes built-in rotameter for gas
For the X5 Wire Feeder 200 part descriptions, refer to "X5 Wire Feeder 200" on page 10, "Wire spool and hub (200)" on
page 11 and "Wire feed mechanism" on page 17.
For the X5 Wire Feeder 300 part descriptions, refer to "X5 Wire Feeder 300" on page 14, "Wire spools and hubs (300)" on
page 16 and "Wire feed mechanism" on page 17.
For the control panel descriptions, refer to "Manual control panel (X5 FP 200R)" on page 13, "Manual control panel (X5 FP
300R)" on page 17 and "Auto control panel (X5 FP 300)" on page 18.
X5 cooling units:
• X5 Cooler, 1 kW.
For the cooling unit part descriptions, refer to "X5 cooling unit (optional)" on page 21.
MIG welding guns:
• Flexlite GX welding guns.
For more information on the Flexlite GX welding guns, refer to
© Kemppi
Kemppi Userdoc.
6
X5 FastMig
Operating manual - EN
1920960 / 2144