Auto Control Panel: Home View - Kemppi X5 FastMig Operating Manual

>> Changed welding parameters can be quickly saved onto the active memory channel by keeping the Memory
channels button pressed for approx. 2 seconds. This works in any view.
4. View menu button
>> Enter view selection
>> Long press of the button returns to Home view, or if already in Home view, to the last used view.
5. Welding parameters button
>> Shortcut to the welding parameters view
6. View selection
>> Change view by turning the control knob (2)
>> Confirm view change by pressing the control knob (2).
Views (7)
A. Home view
B. Channels view
C. Welding parameters view
D. Weld history view
E. Device settings view
F. Info view.
After each weld, a weld summary

3.3.1 Auto control panel: Home view

X5 Wire Feeder 300 Auto control panel's home view is also the main welding view.
1. Channel (and welding program if in use)
2. Applied welding parameters and functions
3. Wire feed speed
4. Welding process
5. Applied device settings
6. Welding voltage
7. Welding voltage fine tuning
>> With Wise program features a corresponding Wise parameter adjustment is displayed.
© Kemppi
(Weld data) is displayed briefly.
81
X5 FastMig
Operating manual - EN
1920960 / 2144