General - Kemppi X5 FastMig Operating Manual

1. GENERAL

These instructions describe the use of Kemppi's X5 FastMig equipment. The equipment consists of multi-purpose weld-
ing power sources, wire feeders and cooling unit (optional) designed for demanding professional use in MIG/MAG weld-
ing.
The equipment is intended for manual MIG/MAG welding as well as automatic 1-MIG welding with X5 FastMig Synergic.
The 1-MIG function is accompanied by welding programs, work packs and also the WiseSteel, WiseFusion and WisePen-
etration+ features as optional.
X5 FastMig systems:
Power Source
X5 FastMig is designed to be used together with Kemppi's Flexlite GX MIG welding guns.
X5 FastMig can be used also for MMA welding, gouging and, with X5 Wire Feeder 300 Auto and 300 Auto+, for TIG weld-
ing*.
* TIG welding requires the use of dedicated Flexlite TX TIG torches.
Important notes
Read the instructions through carefully. For your own safety, and that of your working environment, pay particular atten-
tion to the safety instructions delivered with the equipment.
Items in the manual that require particular attention in order to minimize damage and harm are indicated with the
below symbols. Read these sections carefully and follow their instructions.
Note: Gives the user a useful piece of information.
Caution: Describes a situation that may result in damage to the equipment or system.
© Kemppi
200 Manual
X5 FastMig Manual 400
400
X5 FastMig Manual 500
500
Wire Feeder
300 Manual
X5 FastMig Manual 400
X5 FastMig Manual 500
4
X5 FastMig
Operating manual - EN
300 Auto / 300 Auto+
X5 FastMig Synergic 400
X5 FastMig Synergic 500
1920960 / 2144