Wire Spools And Hubs - Kemppi X5 FastMig Operating Manual

7. X5 Wire Feeder 300 Auto+ : Rotameter for gas
8. X5 Wire Feeder 300 Auto+ : Voltage sensing cable connector for interconnection cable
For installing and connecting the cables, refer to "X5 interconnection cable" on page 19 and "Installing cables" on
page 40.
Wire feeder fixing accessories
X5 Wire Feeder 300 can be installed on top of the X5 Power Source with the following optional fixing accessory sets:
• Fixed fixing plates and locking mechanism for one wire feeder
• Rotating plate with locking mechanism for one wire feeder
• Double rotating plate with two locking mechanisms for two wire feeders
• Rotating plate with counter-balance arm for one wire feeder.

1.4.1 Wire spools and hubs (300)

X5 Wire Feeder 300 has three different wire spool hub options available for different wire spools:
• Standard spool (A)
• Spool hub for the small wire spool (B)
>> Attach the extension pieces to the standard spool halves.
• Spool hub for the wire spool with a large center hole (C)
All parts are delivered with the wire feeder.
Loosen and pull the spool hub halves apart to detach them.
© Kemppi
16
X5 FastMig
Operating manual - EN
1920960 / 2144