C6 Smart In Operation; Configuration And Project Creation; Figure 12: Configuration And Project Creation - KEB COMBICONTROL C6 SMART Instructions For Use Manual

PRODUCT DeSCRIPTION

2.6 C6 SMART in operation

C6 SMART is a multi-purpose CPU, which can be used for control and human machine
interface applications (latter on Quad Core only). The computer can be maintained re-
motely via COMBIVIS connect.
C6 SMART can be equipped with various IOs direct connected on the right side of the
CPU. For both, PLC and HMI applications, the following actions are expected:
• Configuration and creation of the C6 SMART
• Process management

2.6.1 Configuration and project creation

During the configuration phase, the user creates the control project using COMBIVIS
studio 6 (or the interfaces for operation and monitoring of the technical process by using
COMBIVIS studio HMI). In both cases, a PC where software licenses are installed is
necessary. Than the following actions can be done:
• Creating the project.
• Saving the project.
• Testing the project.
• Simulating the project.
After compiling the configuration, you load the project into the C6 SMART device.
Figure 12:
26
Configuration and project creation