Connecting User Computer To C6 Smart; Figure 18: Start Network And Dial-Up Connections; Figure 19: Definition Of The Ip Address - KEB COMBICONTROL C6 SMART Instructions For Use Manual

INSTALLATION AND CONNeCTION

3.8 Connecting user computer to C6 SMART

You can connect the software tools to C6 SMART using an Ethernet cable connected to
Ethernet port (X6).
Please note that the C6 SMART is equipped with a static IP address.
In case the user likes to change the IP address (for example to 172.17.17.182) or acti-
vate the DHCP, you can follow the procedure which is described below:
Figure 18:
•
•
•
Figure 19:
34
Start network and dial-up connections
LAN (X6) is the only configurable port. BUS (X5) is reserved for EtherCAT com-
munication and cannot be configured.
Double click on the available connection icon.
If you want to assign a static IP address choose "Specify an IP address" and write
the IP Address, Subnet Mask and Default Gateway.
Definition of the IP address