KEB COMBICONTROL C6 SMART Instructions For Use Manual page 61

SySTeM MANAGeR
To start the selective backup, click the button "Backupfeatures into a .ASR repository".
The utility will display a list of available features and settings to be saved.
The window is self-explain, follow the instructions on the screen and mark the check box
of the desired features you need to backup.
Once the selection is completed, press Run to select the target path and to start the
process.
NOTICE
Once the process is started the status bar at the bottom of the system manager applica-
tion informs on the operation in progress.
To restore a selective backup click on the button "Restore features from a saved .ASR
repository" and locate the archive. Once the archive has been loaded, you can press the
"Details" button to check the archive contents. A complete list of all the features available
in the .ASR archive, including application version, will be displayed.
The restore process provides the automatic shutdown of the running processes (Control
project, HMI, connect), the file replacement from the archive and the new processes
restart at the end.
The restore process may require several system restarts; the process is fully automated.
Compatibility check
A selective backup can be restored to the same system from where it comes as well to
another device. When doing the restore operation of the operating system component
the System manager utility verifies if the archive content is compatible or not with the
actual hardware.
The backup of the studio HMI application provides the backup of
all the user's applications present on the "MMCMemory" flash disk.
► In case the data folder has been moved out of the default path, it
will NOT be saved in the backup.
Target file for the selective backup file can be an internal or external storage
disk.
If the system manager cannot determine the compatibility conditions, it will
display a warning message and the user will have the final decision.
61