Operation Of The Unit; Keyboard - KEB COMBIVERT F5 Instruction Manual

3. Operation of the
Unit
3.1

Keyboard

When switching on KEB COMBIVERT F5 the value of parameter CP.1
appears (see Drive mode to switch the keyboard function.)
The function key
(FUNC) changes between
the parameter value and
parameter number.
With UP ( ) and DOWN
( ) the value of the
parameter number is
increased/decreased
with changeable
parameters.
Principally during a change, parameter values are immediately accepted
and stored non-volatile. However, with some parameters it is not useful
that the adjusted value is accepted immediately . In these cases (CP.28,
CP.32, CP.33, CP.34) the adjusted value is accepted an stored non-
volatile by pressing ENTER.
If a malfunction occurs during operation, then the actual display is
overwritten by the alarm message. The alarm message in the display is
reset by ENTER.
error
With ENTER only the error message in the display is
reset.In the inverter status display (CP.3) the error is still
displayed. In order to reset the error itself, the cause must
be removed or a power-on reset must be made.

Operation of the Unit

GB
GB - 13