Transfer The Project From The C6 Smart To The Configuration Computer; Figure 46: Enter Password; Figure 47: Debugging The Project - KEB COMBICONTROL C6 SMART Instructions For Use Manual

COMMISSIONING A PROjeCT
Figure 46:
In case the project is not protected, just click on the "OK" button, otherwise insert the
name and password of a project user that has the rights to change the project.
A debug session starts in COMBIVIS studio HMI on the configuration PC. Now you are
able to:
•
•
•

5.2.9 Transfer the project from the C6 SMART to the configuration computer

This option allows you to transfer the project from C6 SMART to the configuration PC in
order to check or change and hence transfer again into C6 SMART.
Make sure that the project is not running on C6 SMART, start COMBIVIS studio HMI on
the configuration PC. Click on the "File" menu and select "Open Device..."
Figure 47:
•
56
Enter password
see the project view and navigate between projects. Please note that you can see
different screen from those seen on C6 SMART and that your debugging is not
affecting the normal running of C6 SMART project.
See and change the value of the variables.
set a breakpoint and debug the Visual Basic scripts running in the project.
It is always suggested to protect the project with a password in order to don't
allow changes to the project by not authorized users.
Debugging the project
Select TCP in the upper left list.