Basic Safety Instructions; Target Group; Transport, Storage And Proper Use - KEB COMBICONTROL C6 SMART Instructions For Use Manual

bASIC SAfeTy INSTRUCTIONS

1 basic Safety Instructions
This instrcutions for use contains the information necessary for the intended use of the
described product (control unit, operating material, software etc.).
The safety instructions can be supplemented by local, country or application-specific
safety instructions. This list is not exhaustive. Non-observance will lead to the loss of
any liability claims.
ATTENTION

1.1 Target group

This manual is written for qualified personnel from construction, project planning, ser-
vice and commissioning. Qualified personnel for the purpose of this instruction manual
must have the following qualifications:
Knowledge and understanding of the safety instructions.
• Knowledge of automation technology.
• Knowledge of functional safety.
• Skills for the installation and assembly of electrical equipment.
• Detection of hazards and risks of the electrical drive technology.
• Understanding of the function in the used machine.
• Knowledge of the operation of the operating system Windows.
• Knowledge of the
• Knowledge of national safety regulations (e.g.

1.2 Transport, storage and proper use

The transport is carried out by qualified persons in accordance with the environmental
conditions specified in this manual. The devices shall be protected against excessive
strains.
ESD
Do not store the devices
•
•
•
14
Hazards and risks through ignorance.
► Read the instruction manual !
► Observe the safety and warning instructions !
► If anything is unclear, please contact KEB !
DIN IEC 60364-5-54.
electronic devices contain electrostatic sensitive components.
► Avoid contact.
► Wear ESD-protective clothing.
in the environment of aggressive and/or conductive liquids or gases.
with direct sunlight.
outside the specified environmental conditions.
DGUV regulation 3).