KEB COMBICONTROL C6 SMART Instructions For Use Manual page 60

SySTeM MANAGeR
The clone operation has two optional settings:
•
•
Click "Run" to start the process.
You will be asked to provide a path where to store the clone snapshot.
Once the process is started the status bar at the bottom of the system manager applica-
tion informs on the operation in progress.
To restore a clone snapshot you can simply click on the "Restore a saved system clone
snapshot" button and locate the ".ASR" repository file.The status bar at the bottom of the
system manager application informs on the operation in progress.
The restore process provides the automatic shutdown of the running processes (Control
project, HMI, connect). The file replacement from the archive and the processes restart
at the end.
Compatibility check
A clone snapshot can be restored to the same system from where it comes as well to
another device. When doing the restore operation, the System manager utility will verify
if the snapshot provided is compatible with the actual hardware.
NOTICE
Selective Backup and Restore processes
The selective backup provides support to backup only specific and selected features,
files and application settings.
60
Operating system image: allows to create a clone of the operating system ROM
image.
Custom registry keys: allow to specify custom keys to be saved in the backup.
Target path for the clone file can only be an external storage device such as a
USB stick.
The restore of a clone snapshot cannot be selective.
When restoring a clone snapshot of a system associated to a COM-
bIVIS connect Domain, please consider that the COMbIVIS connect
Identity is also restored.
► This means that if the target device was also already associated to
a COMBIVIS connect Domain, it will lose it original identity.
► In case you need to keep it, it is suggested to save the "auth.bin"
file from the COMBIVIS connect runtime installation folder before
restoring the clone snapshot.When restoring a feature backup, the
COMBIVIS connect identity of the target device is instead main-
tained.
If the system manager cannot determine the compatibility conditions, it will
display a warning message and the user will have the final decision.