Commissioning A Project; Combivis Studio 6 Project; Project Implementation; Figure 23: Task Configuration - KEB COMBICONTROL C6 SMART Instructions For Use Manual

COMMISSIONING A PROjeCT

5 Commissioning a Project

5.1 COMbIVIS studio 6 project

5.1.1 Project implementation

The CONTROL PLC runs as a thread with "real time" priority.
The execution model is based on the "task" concept; the program execution requires the
definition of tasks and the assignment of priority and execution cycle according to the
following figure (see below in this manual about how to configure COMBIVIS studio 6 for
use with C6 SMART system).
Figure 23:
40
Task configuration