Debugging The Project; Figure 43: Debugging The Project - KEB COMBICONTROL C6 SMART Instructions For Use Manual

COMMISSIONING A PROjeCT

5.2.8 Debugging the project

You can debug the project in C6 SMART by connecting with the configuration PC.
In order to be able to use the debugging functionality you must prepare your project as
follows:
•
•
Select TCP in the upper left list.
Figure 43:
Click on the button "Attach To Process..."
54
Select "Networking" in the project explorer window of COMBIVIS studio HMI.
Enable the property "Debugger" in the "Properties" window of COMBIVIS studio
HMI.
Debugging the project
Insert the IP address of the C6 SMART.