Two-Passenger Canopy With Visage Display Unit Installation - Club Car Precedent Maintenance And Service Manual

Electric vehicle with eric charging system gasoline vehicle with kohler ech440 engine

Hide thumbs Also See for Precedent:

Table of Contents

BODY AND TRIM

TWO-PASSENGER CANOPY WITH VISAGE DISPLAY UNIT INSTALLATION

Put the tabs of the display unit support (12) into the front canopy struts (Figure 4-19, Page 4-23).

Install the display unit support onto the front canopy struts.

Connect the display unit harness (11).

Install the Visage display unit (VDU) (10) onto the display unit support.

Install the screws (9). Tighten the screws to 24 lb·in (2.7 N·m).

Make sure that the strut harness is routed correctly.

Figure 4-19 Visage Display Unit Installation

2020 Precedent,Villager 2 and 4 Maintenance and Service Manual

Two-Passenger - Canopy

Villager 2 Villager 4