4
Villager 4 - Monsoon Canopy
2+2 FRONT CANOPY STRUT INSTALLATION
1.
Install the front canopy strut (3) onto the vehicle (Figure 4-38).
2.
Install the front canopy strut cover (2) onto the front canopy strut.
3.
Install the screws (4). Tighten the screws to 18.4 lb·ft (25 N·m).
4.
Install the screw (1). Tighten the screw to 31 lb·in (4.6 N·m).
5.
Install the canopy.
Page 4-40
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual
Figure 4-38 Front Canopy Strut Installation
BODY AND TRIM