Carbon Canister; Carbon Canister Removal; Carbon Canister Installation - Club Car Precedent Maintenance And Service Manual

21

Carbon Canister

CARBON CANISTER

CARBON CANISTER REMOVAL

1. Disable the vehicle.
2. Relieve the fuel pressure.
3. Disconnect the battery.
4. Clean the area around the vent line (1) and purge line (2) on the carbon canister (3).
5. Remove the clamps (4).
6. Disconnect the vent line and purge line.
7. Remove the carbon canister from the bucket brace.
7.1. Lift the tab (5).
7.2. Slide the carbon canister towards the fuel tank and remove from the bucket brace.

CARBON CANISTER INSTALLATION

1. Install the carbon canister (3) on the bucket brace. Make sure that the tab (5) is secured (Figure 21-11).
2. Connect the vent line (1).
3. Connect the purge line (2).
4. Install the clamps (4).
Page 21-12 2020 Precedent,Villager 2 and 4 Maintenance and Service Manual
Figure 21-11
GASOLINE VEHICLE - FUEL SYSTEM