Leaf Springs (Four-Passenger - Heavy Duty With
9
Panhard)
8.
Install the brake cable onto the shock mount bracket (12) (Figure 9-16).
9.
Install the cable end (13) onto the brake lever.
10.
Install the clevis pin (14) and the bow tie locking pin (15).
11.
Lower and remove the floor jack under the transaxle.
12.
Install the tire and wheel assembly.
13.
Lower the rear of the vehicle.
14.
Electric Vehicle: Connect the batteries.
Gasoline Vehicle: Connect the battery and spark plug wire.
Page 9-14
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual
Figure 9-16 Connect Brake Cable
REAR SUSPENSION