ELECTRIC VEHICLE - ELECTRICAL
COMPONENTS
2771
ELECTRONICS MODULE INSTALLATION
1.
Return electronics module (3) to its location in vehicle but leave it tilted forward.
2.
Complete connections to the controller (1), the Tow/Run switch (5) and the solenoid (4) per the electrical
schematics.
3.
Tighten bolts (6) on the controller to 108 in·lb (12.2 N·m).
4.
Tighten nuts (7) on the solenoid to 6.4 ft·lb (8.7 N·m).
7
10
11
4
Figure 13-11 Controller and Solenoid Removal
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual
6
1
5
8
13
Electronics Module
9
Page 13-11