Malfunction Indicator Light (Mil); Malfunction Indicator Light Removal; Malfunction Indicator Light Installation - Club Car Precedent Maintenance And Service Manual
Electric vehicle with eric charging system gasoline vehicle with kohler ech440 engine
Hide thumbs
Also See for Precedent:
- Owner's manual (88 pages) ,
- Owner's manual (48 pages) ,
- Owner's manual (72 pages)
Table of Contents
Advertisement
19
Malfunction Indicator Light (MIL)
MALFUNCTION INDICATOR LIGHT (MIL)
MALFUNCTION INDICATOR LIGHT REMOVAL
1.
Disconnect the battery and spark plug wire.
2.
Remove the instrument panel.
3.
Disconnect the wires (1) (Figure 19-38, Page 19-34). Do not allow wires to touch.
4.
Push the retaining tabs (2) and remove the malfunction indicator light (3) from the instrument panel.
MALFUNCTION INDICATOR LIGHT INSTALLATION
1.
Push the malfunction indicator light (MIL) (1) into the hole in instrument panel until retaining tabs engage (Figure
19-38, Page 19-34).
2.
Connect the MIL wires.
3.
Install the instrument panel.
4.
Connect the battery and spark plug wire.
Page 19-34
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual
Figure 19-38 Malfunction Indicator Light (MIL)
GASOLINE VEHICLE - ELECTRICAL
COMPONENTS
Advertisement
Table of Contents
Troubleshooting
