BODY AND TRIM
Foot Deck Assembly
1.
Make sure the J-clips (1) are installed on the foot deck support (2) (Figure 4-53).
2.
Install the handrail (3) into the foot deck support.
3.
Install the screws (4). Tighten the bolts to 5.5 lb·ft (7.5 N·m).
4.
Install the foot deck (5) onto the foot deck support.
5.
Install the screws (6). Tighten the screws to 6 lb·ft (8 N·m).
6.
Install the floormat (7) onto the foot deck.
7.
Install the push rivets (8).
Figure 4-53 Foot Deck (2+2) Assembly
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual
Villager 4 - Rear Body
Page 4-55
4