Club Car Precedent Maintenance And Service Manual page 87

BODY AND TRIM
Side Frame Removal
1. Remove the bolt (1), washers (2), and nut (3) (Figure 4-49).
2. Remove the nut (4) and bolt (5).
3. Remove the side frame (6).
Side Frame Installation
1. Install the side frame (6) onto the foot deck (Figure 4-49).
2. Install the nut (4) and bolt (5). Tighten the bolt to 8.5 lb·ft (11.5 N·m).
3. Install the nut (1), washers (2), and bolt (3). Tighten the bolt to 8.5 lb·ft (11.5 N·m).
Figure 4-49 Side Frame
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual
Villager 4 - Rear Body
Page 4-51
4