Testing The Fuel Level Sending Unit; Fuel Level Sending Unit Removal; Fuel Level Sending Unit Installation; Ignition Coil And Charge Coil - Club Car Carryall 1500 2016 Maintenance And Service Manual

ELECTRICAL COMPONENTS: GASOLINE
13

Ignition Coil and Charge Coil

VEHICLES

TESTING THE FUEL LEVEL SENDING UNIT

See Test Procedure 30 – Fuel Level Sending Unit on page 11-34.

FUEL LEVEL SENDING UNIT REMOVAL

See Fuel Level Sending Unit Removal on page 15-12.

FUEL LEVEL SENDING UNIT INSTALLATION

See Fuel Level Sending Unit Installation on page 15-13.
IGNITION COIL AND CHARGE COIL
See General Warnings, Section 1, Page 1-2.
It is recommended that the ignition coil and charge coil be thoroughly tested prior to replacement.

TESTING THE IGNITION COIL

See Test Procedure 21 – Ignition Spark on page 11-29. See also Test Procedure 22 – Engine Kill Wire on page
11-29, Test Procedure 23 – Grounded Kill Wire on page 11-30. For charge coil testing, see Test Procedure 19
– Charge Coil on page 11-27.

IGNITION COIL AND/OR CHARGE COIL REMOVAL

The ignition coils are located under the flywheel shroud of the engine and the charge coil is located behind the flywheel.
Replacement requires the removal and installation of the engine. It is recommended to thoroughly test the coils prior
to replacement. See Engine Removal on page 15-1.
Refer to the engine manual for additional testing, removal, disassembly, and installation procedures. See the
Kawasaki FH680D engine manual (CC P/N 103351201).

OIL PRESSURE SENSOR

See General Warnings, Section 1, Page 1-2.
Refer to the engine manual for additional testing, removal, disassembly, and installation procedures. See the
Kawasaki FH680D engine manual (CC P/N 103351201).

HEADLIGHTS

See General Warnings, Section 1, Page 1-2.
Page 13-16 2016 Carryall 1500/1700 and XRT 1550 Maintenance and Service Manual