Front Shock Absorber Inspection - Club Car Precedent Maintenance And Service Manual

STEERING AND FRONT SUSPENSION
3. Move the rack and pinion (3) into position. Tighten the bolts (4) to 22 lb·ft (30 N·m) (Figure 7-23).
1383D
Figure 7-23 Install Rack and Pinion
4. Install the front wheels.
5. Adjust the camber and toe-in.
6. Electric Vehicle: Connect the batteries.
Gasoline Vehicle: Connect the battery and spark plug wire.

FRONT SHOCK ABSORBER INSPECTION

1. Examine the area (1) where the shaft enters the shock absorber body (Figure 7-24).
1.1. If there is fluid leakage, replace the shock absorber.
1311D
Figure 7-24 Shock Absorber Inspection
1
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual
Front Suspension Components
7
Page 7-19