BODY AND TRIM
HIP RESTRAINT
HIP RESTRAINT REMOVAL
1.
Remove the seat bottom (1) from the vehicle (Figure 4-2).
2.
Remove the screws (2).
3.
Remove the hip restraint (3).
HIP RESTRAINT INSTALLATION
1.
Align the hip restraint (3) onto the seat bottom (1) (Figure 4-2).
2.
Install the screws (2). Tighten the screws to 65 lb·in (7.3 N·m).
FRONT BODY
See General Warnings on page 1-2.
FRONT BODY REMOVAL
1.
Remove the four screws (2) and pull the brow cap (1) from the brow and fascia assembly (4) (Figure 4-3,
Page 4-7).
Figure 4-2 Hip Restraint
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual
4
Hip Restraint
Page 4-5