BODY AND TRIM
2+2 REAR CANOPY SUPPORT REMOVAL
CAUTION
• To prevent damage to the canopy, do not remove the canopy supports from the vehicle without
first removing the canopy.
• Using tools to thread the bolts could prevent proper feel of the bolt as it captures the female threads
in the support. This could result in damage to the components.
1.
Remove the canopy.
2.
Remove the screws (1) and brackets (2) (Figure 4-39).
3.
Remove the rear canopy support (3).
Figure 4-39 Rear Canopy Support Removal
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual
Villager 4 - Monsoon Canopy
4
Page 4-41