Table of Contents
Advertisement
Step 14: Front Wall Frame Assembly
A: Attach (1916) Front Divider to (1764) Floor Front with 1 (H6) 1/4 x 4-3/4" Hex Bolt (with lock washer, flat
washer and t-nut). Keep bolt loose. (fig 14.1)
B: Attach (1980) Top Front Back to (1916) Front Divider with 1 (H4) 1/4 x 4" Hex Bolt (with lock washer, flat
washer and t-nut). Keep bolt loose. (fig. 14.1)
C: Make sure (1980) Top Front Back is level then attach to both (1500) Posts with 4 (S7) #12 x 2" Pan Screws
(with 3/16" flat washer). (fig. 14.1)
D: Tighten all bolts from this step.
Fig. 14.1
1/4" Flat
Washer
1/4" Lock
Washer
H4
1/4" Flat
Washer
1/4" Lock
Washer
1500
Wood Parts
1 x
Front Divider 2 x 4 x 59-1/4"
1916
1 x
Top Front Back 1 x 4 x 38-1/2"
1980
1916
S7
H6
1/4"
T-Nut
Hardware
1 x
1/4 x 4-3/4" Hex Bolts (1/4" lock washer, 1/4" flat washer and 1/4" t-nut)
H6
1 x
1/4 x 4" Hex Bolts (1/4" lock washer, 1/4" flat washer and 1/4" t-nut)
H4
4 x
#12 x 2" Pan Screws (3/16" flat washer)
S7
31
1980
3/16" Flat
Washer
S7
1500
1764
europecustomerservice@kidkraft.com
Advertisement
Table of Contents
