Attach Exit End Assembly To Fort - KidKraft Cedar Summit Lookout Extreme Installation And Operating Instructions Manual

Step 73: Attach Exit End Assembly to Fort
A: Fit the Exit End Assembly to the last Elbow Assembly by lining up the arrows on each assembly. Notice the
elbow orientation. (fig. 73.1 & 73.2). Attach with 6 (PB7) ¼ x 12.7mm Pan Bolts and Square Lock Nuts.
Fig. 73.2
1/4 x 12.7mm
Pan Bolt
Elbow
Assembly
Exit Elbow
Assembly
Square Lock Nut
127
Fig. 73.1
Make sure arrows are aligned
Other Parts
6 x 1/4" x 12.7mm Pan Bolt
6 x 1/4" Square Lock Nut