Attach Swing End Ground Stakes And Swings - KidKraft Appleton Play System F24148 Installation And Operating Instructions Manual

Step 23: Attach Swing End Ground Stakes and Swings
A: Drive 1 (0318) Ground Stake 10-1/2" into the ground at each (2803) SW Post on the inside of the assembly
and attach with 2 (S3) #8 x 2-1/2" Wood Screws per ground stake. (fig. 23.1 & 23.2)
B: Attach 2 Belt Swings to the Bolt-Thru Swing Hangers. (fig. 23.1)
WARNING:
10-1/2" into ground. Digging or driving stakes can be dangerous if you do not check
first for underground wiring, cables or gas lines.
Fig. 23.2
2803
10-1/2"
Wood Parts
2 x Ground Stake 1 1/4 x 1 1/2 x 14"
0318
To prevent tipping and avoid potential injury, stakes must be driven
S3
0318
4 x
Fig. 23.1
Hardware
#8 x 2-1/2" Wood Screw
S3
37
Belt
swings
Other Parts
2 x Belt Swing