Shutdown; Glass Plate; Disassembly For Transport - Proceq ZAA 2600.SW Instruction Manual

5.3 Shutdown

Turn off the device by pressing the power button (10). The display will turn off and
the device is shutting down. Before removing the power cable, turn off the main
switch (15).

5.4 Glass plate

The provided delivered glass plate is used for the optional modification sets, mainly
such as application. Generally, the scrub tester can be used with the glass plate,
though the thickness of the sample will be reduced due to the maximal height of the
tool holder (4) and no liquids must be used. Therefore, it is recommended to use
the scrub tester with the sample tray for scrub tests.

5.5 Disassembly for transport

Always switch off the device and unplug the power cable before dissembling.
To prevent transport damage, the device must be disassembled as follows:
•
Fold up the tool holder (4) and loosen the screws of the sample frames (6) with
a quarter-turn.
•
Remove the sample frames (6) and afterwards the sample tray (3).
•
Replace the sample frames (6) and fix them again, fold down the tool holder
(4).
•
Move the tool holder (4) to the centre of the device.
•
Move the start stop (1) and the end stop (2) to the centre of the device as well
and fasten them with their screws.
Shipping condition:
No friction sets must be inserted into the tool holder (4) for shipping.
Page 18