Open the menu by pressing the „Menu"
button.
Go back a level by pressing the „Back"
button.
Return to the main screen by pressing the „Home"
button.
7.3 Using layouts
Layouts are memory slots with a custom set name which store a saved application
profile (cycle speed and stroke length). This is especially useful for recurring tasks
where the same speed and length are required again.
There are 10 layout slots available. Layout settings can be changed as follows.
7.3.1 Selecting a layout
The current layout can be selected by tapping the layout field on the main screen.
7.3.2 Editing the selected layout
To edit the currently selected layout, choose „Selected layout" in the menu. The
parameters „Name", „Speed" and „Length" can be adjusted by tapping the values,
entering the desired adjustment and confirming it with "OK".
Return to the main screen by tapping the „Home"
button.
The speed and length settings can also be changed directly from the home screen.
To adjust the values tap on the speed or the length field and either use the slider or
the
and
buttons. These settings will be saved automatically in the selected
layout.
Page 32