Table of Contents
Advertisement
8.2.1 Mounting the friction finger set A
1) Place the felt stamp.
3) Clamp the rubbing cloth
smoothly.
If your friction finger set does not look like picture 3, meaning one corner of
the rubbing cloth (circled in red) does not face the holder screw (circled in
green), you need to redo step 2.
The test load of 22 N will only be reached if the knurled nut is mounted.
To avoid ejection of weights (accidentally falling down) they have to be
screwed to the holder.
2) Place the rubbing cloth on the felt stamp
with one corner (circled in red) facing the
holder screw (circled in green).
4) Slide on the weight and screw it in place.
Page 38
Advertisement
Table of Contents
